Die Auktion mit 535 Losen endete am 25. June 2023. 79% aller Lose wurden verkauft
WIE KANN ICH FÜR MEINE BESTELLUNG BEZAHLEN?
Alle erfolgreichen Gebote werden automatisch zu einer einzigen Bestellung zusammengefasst. Für diese können Sie uns nach Auktionsende in Ihrem persönlichen Kundenkonto Ihre bevorzugte Bezahl- und Versandart oder eine alternative Lieferadresse mitteilen.
Wenn wir diese freiwilligen Angaben nicht von Ihnen erhalten melden wir uns automatisch im Laufe des Montags nach Auktionsende mit einer Zahlungsanweisung per Email. Basierend auf Erfahrungswerten schlagen wir Ihnen die bequemste Bezahlmehtode und die günstigste Versandart vor. Sie möchten Ihre Bezahl- und Versandart ändern oder eine alternative Lieferadresse angeben? Kein Problem! Besuchen Sie Kundenkonto/BESTELLUNGEN oder kontaktieren Sie uns per Email.
Wählen Sie während der Bestellung Ihre bevorzugte Bezahl- und Versandart und schicken Sie diese ab. Sie erhalten Ihre Zahlungsanweisung spätestens am darauffolgenden Tag per Email. Die Zahlungsfrist beträgt sieben Tage. Sie planen eine Bestellung per Ratenzahlung zu begleichen? Bitte sprechen Sie uns gerne vor Ihrer Bestellung darauf an.
Für mehr Informationen zu Bezahlung und Versand, besuchen Sie unsere Häufigen Fragen.
IHRE BESTELLUNG IN DEN BESTEN HÄNDEN
Nach Zahlungseingang versenden wir Ihre Bestellung für gewöhnlich am darauffolgenden Werktag. Wir bestätigen den Eingang Ihrer Zahlung per Email und informieren Sie zur Versandvorbereitung. Nach Abholung der Sendung durch unsere Versanddienstleister teilen wir Ihnen die Sendungsnummer per Email mit. Den Status Ihrer Sendung können Sie auch jederzeit unter Kundenkonto/BESTELLUNGEN einsehen. Ihre Rechnung geht Ihnen automatisch am Tag des Versands zu.
Bevorzugen Sie für eine Bestellung einen Versand zu Ihrer Arbeitsstelle? Sie sind im Urlaub und wünschen den Versand zu einer Packstation oder einem Freund? Kein Problem! Diese Änderungen können Sie jederzeit unter Kundenkonto/BESTELLUNGEN vornehmen. Alternativ können Sie natürlich jederzeit auch per Email informieren.
GARANTIE!
Alle angebotenen Artikel werden von unseren Experten akribisch auf deren Echtheit geprüft und detailiert beschrieben. Wir bieten ausschließen zeitgenössiche Originale an. Etwa 15% aller Kundeneinlieferungen ensprechen unseren Anforderungen nicht und werden retourniert.
Gekauft wie gesehen? Nicht bei uns. Im Gegensatz zu traditionellen Auktionshäusern bieten wir volles Rückgaberecht of Originalität an. Sollten Sie mit Ihrer Bestellung nicht zufrieden sein, können Sie die Bestellung innerhalb 14 Tagen widerrufen. Bitte kontaktieren Sie uns vor dem Rückversand. Für mehr Einzelheiten besuchen Sie bitte unsere häufigen Fragen.
In eigener Sache: Bieten Sie nur auf Lose, die Sie auch erwerben möchten. Bitte vermeiden Sie Gebote nach Auktionende zu stornieren. Sollten Sie ein fehlerhaftes Gebot abgegeben haben, informieren Sie uns bitte umgehend. Wir löschen Ihre Gebote gerne bis 24 Stunden vor Ende der Auktion.
Aluminum based, curved locomotive bow eagle with a wingspan of 139.7 cm and a height of 63.8 cm. The wreath has a diameter of about 23.2 cm and the swastika is 14.0 cm. The reverse shows that the upper part of the wings is folded back, and the eagle’s head and neck are hollow. The leaves of the wreath run up to the claws. Only one seam.
The book on the topic remarks that only 5 of these eagles were found at that time. Three had a repaired swastika and two had welded wings. GIs had to fit those enormous eagles into transport boxes and had no choice but to cut them down. The book states further that one eagle was shipped in one piece as the GI had access to proper packaging.
This eagle is to believe the only one outside of two rail museums in Germany. Both the Technick Museum in Berlin and in Nurnberg show this eagle on electric train engines that are on display.
This eagle was part of the famous Roger Bender collection.
About fast locomotives:
There have been efforts to improve the aerodynamics of steam locomotives since around 1900.
However, systematic tests on the aerodynamics of steam locomotives were not made in Germany until the 1930s. In addition to examining the aerodynamics, it was also necessary to determine the extent to which the engine of the locomotive, in particular the bearings, heat up due to a lack of air supply. The sufficient supply of combustion air under the grate was also an important point.
The tests showed that a faired locomotive had a power gain of 290 hp over the un-faired version at 120 km/h; at 140 km/h it was even 385 hp. With an indicated output of 1980 hp, this was a gain of around 15 and 20 percent, respectively.
The results of these investigations were incorporated into the design of the two class 05 express locomotives, both of which were delivered in 1935 with complete streamlining.
In the meantime, the class 61 tank locomotive, also with full fairing, was created and intended for express traffic between Berlin and Dresden. There was a suitable wagon set for this, the so-called Henschel-Wegmann train, which was aerodynamically adapted to the locomotive. A second example of this type of locomotive was built in 1939 in a slightly modified form.
Another express locomotive with streamlined livery was the DR class 06, two of which were delivered by Krupp in 1939. In the same year, the first DR class 01.10 and DR class 03.10 locomotives were put into service. Here, for the first time, a larger series of locomotives with streamlining was manufactured, namely 55 units of the 01 10 series and 60 units of the 03 10 series. The shape of the casing of both series was similar but differed visually from the previous streamlined locomotives.
The last Reichsbahn locomotive with streamlining was added in 1941 with the class 19 10, a steam engine locomotive with single-axle drive. Its fairing was visually like that of the 01.
In addition to steam locomotives, the E18 and E19 series electric locomotives should also be mentioned, which were designed as streamlined locomotives before the Second World War and were intended to reach speeds of up to 180 km/h in the case of the E19.